Protek Stable Coat - Clear 25 Litre

Overview

The Protek Stable Coat - Clear 25 Litre is delivered direct from central UK stocks held at our manufacturer. Every item is pre-packed ready for a prompt delivery.

Vehicle

Typically a van-sized vehicle will deliver. A selection of the UK's top carriers are used to ensure a prompt and reliable service.

Access

The package(s) will be carried to a common entrance like a front door, after unloading at the kerb-side. An adult will need to accept and sign for delivery.

Free Delivery

This manufacturer offers free delivery within mainland England, Wales and Southern Scotland. The above postcode checker will confirm this for you.

Delivery Period

Delivery will typically be made within 3-5 working days from the date of order.

Offshore Delivery

With the exception of the Isle of Wight and Northern Ireland (where a charge applies for each), offshore locations are not serviced for this product. We cannot deliver to; Guernsey (GY), Western Isles (HS), Isle of Man (IM) and Jersey (JE). All Scottish islands, for example those under the PA post code, also cannot be serviced.

Distant Surcharge

Due to additional zone fees, certain distant locations can only be serviced at a surcharge (at cost). The above post code checker can confirm if a surcharge will apply.

These locations include:

Isle of Wight (PO30-41) at £16.80

Scottish Highlands & Grampians (AB,FK,IV,KW,PA & PH) at £19.20

Northern Ireland (BT) at £35.00

Product Notes

It is recommended that two coats are applied for the first treatment, with only one coat needed for future maintenance.

Image Notes

Containers shown are provided as an example only; the exact container per product may differ.

Make sure you wash out nozzles and pipes on sprayers with water and a spot of detergent, especially before it dries.

It is Protek’s task as manufacturers of quality wood stains, decorative timber coatings and preservatives, to design treatments that are effective and long lasting, while aiming not to harm the user or any flora and fauna that comes into contact with it. Protek Woodcare range is the attractive and effective solution to looking after all types of outdoor timber. Each product is skilfully made to minimise any human health and safety risk and the effect on the environment. They can be used on a variety of finished states such as rough sawn or planed surfaces and will leave a natural looking coloured stain high build finish.

Protek in the environment

The Protek wood stain range originated in the 1980s using only water-based technology for the treatment and preservation of wood. This was a time when most people still used creosote to treat their timber. Our mission at Protek was to change the manufacture of all fencing and shed products to our new water-based wood stains and treatments. We promoted the use of water-based formulas containing organic pigments against oil and solvent based high VOC (volatile organic compounds) products as the way forward. They were (and still are) easier and nicer to use and have a far lower environmental impact.

The decisions we make today to limit the impact we have on the environment is the same philosophy that Protek was created on and one we continue to improve upon. The processes we employ to make the products are in the most energy efficient ways possible. Our longterm commitment to reusing materials and waste on-site within our products are as important to minimising the impact on the environment as the ingredients we put in to make our comprehensive range of wood stains. With natural resources being under pressure by human demands, we can all do our bit by using water-based wood stains and coatings to protect the timber we use to make it last a lifetime.